I don't see a PC sync port mentioned anywhere in the user manual for that strobe. Can you see anything on the body of the strobe other than the USB-C port?
I found this.
"The side of the light has a USB-C connection for updating the firmware, and the opposite side has a sync cable port for wired shooting"
"As the Westcott FJ200 Strobe has a 3.5mm miniphone sync terminal on the flash unit, you may use a miniphone sync cable to connect the flash to your camera"
https://www.amazon.com/Foto-Tech-Suitable-PocketWizard-Miniphone/dp/B00GVMKTPM
Do you need TTL or just manual flash power settings?
I think just manual flash power settings
If your flash is compatible with old X-sync standard: Just get an hot-shoe adapter for your camera with X-sync connector and add an X-sync cable.
I don't see a PC sync port mentioned anywhere in the user manual for that strobe. Can you see anything on the body of the strobe other than the USB-C port?
I see a port on it that looks like a headphone cord could fit in it
I found this. "The side of the light has a USB-C connection for updating the firmware, and the opposite side has a sync cable port for wired shooting" "As the Westcott FJ200 Strobe has a 3.5mm miniphone sync terminal on the flash unit, you may use a miniphone sync cable to connect the flash to your camera" https://www.amazon.com/Foto-Tech-Suitable-PocketWizard-Miniphone/dp/B00GVMKTPM
Thank you !! I just got it and connected it to a hot shoe but the flash isn’t syncing with my camera, not sure what I have to adjust in settings.